2-line system

Trailed sprayers
with bored axles

more information

Trailed sprayers
with unbored axles

Trailed sprayers with bored axles

CTIS/slurry tanker 2-line system for trailed sprayers

  • Prevention of pressure loss in tires thanks to the automatically switching PTG wheel valve
  • Control line opens wheel valve only for tire pressure adjustment/measurement
  • Lines are depressurized when the central tire inflation system is inactive or switched off
  • No maintenance required
  • System operation via digital or ISOBUS control
  • Precise adjustment in the pressure range between 1 and 4 bar (factory setting)
  • No external lines – air is routed through the pre-bored trailer axle
  • Rotary unions with a long service life

CTIS rotary union for bored BPW axles

  • Tested and approved by BPW
  • Patented solution for agricultural axles from BPW
    Rotary union with screwed-on grease cap –
    no penetration of dust or water possible
  • Integrated pressure-equalization element – no entry of air into the wheel hub
  • Axle beam and axle bearings optimally protected against corrosion
  • High airflow

CTIS rotary union for bored ADR axles

  • Tested and approved by ADR
  • Patented solution for agricultural axles from ADR; rotary union with screwed-on grease cap – no penetration of dust or water
  • Integrated pressure-equalization element – no entry of air into the wheel hub
  • Axle beam and axle bearings optimally protected against corrosion
  • High airflow

PTG universal rotary union/strong>
For bored trailer axles from manufacturers such as FAD and Colaert Essieux

2-line system
Trailed sprayers with unbored axles

AIRBOX/drive 2-line system for trailed sprayers

  • Prevention of pressure loss in tires thanks to the automatically switching PTG wheel valve
  • Control line opens wheel valve only for tire pressure adjustment/measurement
  • Lines are depressurized when the central tire inflation system is inactive or switched off
  • No maintenance required
  • System operation via digital or ISOBUS control
  • Precise adjustment in the pressure range between 1 and 4 bar (factory setting)
  • Patented bracket for external rotary union